On this page
Searches all 85 rulings in this report.
A curated digest of the 85 rulings CBP published from October 1, 2026 to October 15, 2026
CBP added 85 ruling letters to CROSS between October 1, 2026 and October 15, 2026, and the batch closed with the portal’s October 30 refresh: a single Headquarters decision, HQ H357904, holding that laptop LCD modules assembled in China from Korean cells remain South Korean goods. 24 of the 85 letters are summarized below, chosen for how directly they bear on an entry decision – multi-country origin calls, retail-set and functional-unit questions, and classifications with a meaningful duty spread. The remaining 61 are listed by number, date and subject in the appendix so the batch stays complete.
The shape of the batch is familiar. Classification dominates, but origin decides the money in most of the letters worth reading: which offshore step still changes a product’s country, what finishing abroad does to a component’s origin, and how far a US-made article can travel before it stops being American. Where a ruling states a rate, it appears below; where it states none, the summary says so rather than inferring one.
Reporting Scope
| Measure | Result |
|---|---|
| Official source reviewed | CBP CROSS, rulings.cbp.gov |
| Portal refresh in the window | October 30, 2026 – 1 record added |
| Rulings added in this window | 85 (84 New York, 1 Headquarters) |
| Decision dates covered | October 1, 2026 – October 15, 2026, 2026 |
| Summarized in the table | 24 |
| Listed in the appendix | 61 |
| Letters stating an HTSUS provision | 60 |
| Letters stating a duty rate | 58 |
Recent CBP Rulings Summary Table
Origin of Laptop TFT LCD Modules: Korea, Not China: Laptop TFT LCD modules assembled in China from LCD cell assemblies manufactured in South Korea are products of South Korea, because the final assembly in China does not substantially transform the Korean-made cell.
Why and what it means
CBP found the Korean cell already fixes the module’s display function, resolution and pixel structure through multi-layer patterning, while the Chinese work of joining the driver IC, printed circuit board and backlight unit to the chassis is less complex and accounts for only 36 percent of the labour cost.
Importers buying modules through a Chinese assembly subsidiary can treat them as South Korean goods rather than Chinese, which matters for marking and for China-specific Section 301 exposure, provided the cell-level facts match the ruling.
Pneumatic Impact Wrench from Malaysia: The pneumatic impact wrench used for automobile tire maintenance and industrial assembly has Malaysian origin because manufacturing and assembly there substantially transform Chinese materials and components into a finished tool.
Why and what it means
Significant machining, heat treatment, and molding in Malaysia create functional tool parts from Chinese blanks and plastic pellets, while the remaining Chinese components depend on that processing to become an impact wrench.
For Section 301 and additional-duty origin determinations, importers should use Malaysia under the described manufacturing scenario, recognizing that changed production facts require CBP review and may warrant a new ruling.
Pencil Tire Gauge Origin in Malaysia: The fully assembled pencil tire gauge, item 1121200011, has Malaysia as its country of origin for marking and trade-remedy purposes, despite its components and raw materials being sourced from China.
Why and what it means
CNC machining and injection molding in Malaysia manufacture significant core components, which are assembled with remaining Chinese components into a gauge with a new name, character, and use.
Importers should use Malaysia as the origin for marking and assessing Section 301 and additional duties, while ensuring actual manufacturing operations match the described facts, which remain subject to CBP verification.
Electric Steam Irons Assembled in Vietnam: The Black & Decker Easy Steam Nonstick Iron, assembled in Vietnam using Chinese and Vietnamese components, has China as its country of origin for purposes of current trade remedies.
Why and what it means
The Chinese soleplate imparts the iron’s character and is its most critical and expensive component; Vietnam’s predominantly simple assembly operations do not substantially transform it, despite local component production and some complex steps.
Importers should treat these irons as Chinese-origin for current trade remedies rather than Vietnamese-origin based on assembly location, and request a new ruling if manufacturing facts change or imported goods differ from the described merchandise.
Origin of Atlantic Salmon Processed in Poland: Atlantic salmon farm-raised and harvested in Norway, then processed into fillets and portions in Poland for export to the United States, is a product of Poland for country-of-origin purposes.
Why and what it means
The Polish operations, including removal of bones, fins, tissue, fat, and membrane followed by filleting and portioning to customer specifications, substantially transform the salmon under the new name, character, or use test.
Importers should account for Polish origin under the described processing scenario, consult USDA’s Agricultural Marketing Service regarding mandatory seafood country-of-origin labeling, and address the merchandise’s exposure to FDA-administered Bioterrorism Act requirements.
United States Origin of BMW X5: The 2026 BMW X5 Multipurpose Passenger Vehicle assembled in South Carolina has United States origin and is eligible for return under HTSUS 9801.00.1065; the ruling states no duty rate.
Why and what it means
Applying the substantial transformation framework, CBP found that examination of the supplied VIN substantiated United States origin, while the purchaser stated that the vehicle had not increased in value or improved in condition.
Eligibility under the returned-products provision depends on the vehicle matching the stated facts, including no advancement in value or improvement in condition abroad, and those material facts may be verified by CBP.
German Wrapping Paper Printed in China: Wrapping paper made from base paper fully manufactured in Germany remains German in origin after designs are printed in China, where the paper is also cut to size, rewound, and packaged.
Why and what it means
The Chinese printing does not create an article with a distinctive name, character, or use because, although significant, printing is subsidiary to the paper’s primary use of wrapping gifts.
Importers can rely on German origin for the described production scenario, but must separately assess applicable additional duties and Chapter 99 reporting requirements, which this ruling expressly does not resolve.
Siphon Tube Set Originating in China: The manually operated siphon tube set, packaged with liquid-transfer and inflation accessories, is classified in HTSUS 8414.20.0000 at 3.7 percent ad valorem, and its country of origin is China despite assembly in Malaysia.
Why and what it means
Dual air-and-liquid functionality supports classification under GRI 3(c) as an air pump, while simple Malaysian assembly does not substantially transform the predominantly Chinese components, including the piston rod assembly.
Importers must use Chinese origin when assessing Section 301 and additional-duty exposure rather than treating Malaysian assembly as origin-conferring, and should seek a new ruling if the manufacturing facts materially change.
Adhesive Paper Labels Processed in Peru: Self-adhesive paper labels classified in HTSUS heading 4819 have Peruvian origin for Section 301 purposes and qualify as originating goods under the United States-Peru Trade Promotion Agreement; no duty rate is stated.
Why and what it means
Die-cutting and printing Chinese adhesive paper rolls in Peru substantially transform them into branded address labels, while the change from heading 4811 to heading 4819 satisfies the agreement’s applicable tariff-shift rule.
Importers may mark the labels “Made in Peru” or “Product of Peru” and seek originating treatment under the agreement, but must separately assess additional duties and Chapter 99 reporting requirements not addressed by this ruling.
Air Blowers from China: The Chinese air blowers are classified by model: 1PAFBW361 under HTSUS 8414.51.9090 at 4.7 percent ad valorem, and 1VAFBW2800 under HTSUS 8414.59.6560 at 2.3 percent ad valorem.
Why and what it means
Model 1PAFBW361 is a floor fan with a self-contained 90-watt motor, within the provision’s 125-watt limit, while model 1VAFBW2800 is a centrifugal fan with a self-contained 310-watt motor.
Importers should distinguish the models for classification and general-duty planning, while separately checking applicable additional duties and Chapter 99 reporting requirements, which this ruling expressly does not address.
Cambodian Origin for Steel OCTGs and Couplings: Alloy steel oil country tubular goods and nonalloy steel API 5CT couplings have Cambodian origin, whether imported separately or preassembled, and their proposed stenciled “Made in Cambodia” marking satisfies applicable country-of-origin marking requirements.
Why and what it means
Slitting and welding foreign steel coils into tubes creates a new product, while cutting, turning, beveling, and threading Chinese coupling stock into connectors substantially transforms that material in Cambodia.
Importers may use the approved Cambodian marking for these tubes and couplings, but the origin determination depends on the specified manufacturing operations, and changed facts or nonconforming merchandise require a new ruling request.
Men’s Polyester Fleece Jacket from Vietnam: The men’s jacket from Vietnam, style D27-00027, is classified under HTSUS 6101.30.2010 as men’s knitted outerwear of man-made fibers, with a general duty rate of 28.2 percent ad valorem.
Why and what it means
The jacket’s 100% polyester knit fleece construction, hip-length coverage, stand-up collar, full front zipper, long sleeves, zippered pockets, and elasticized cuffs and bottom support its classification as knitted outerwear of man-made fibers.
Importers should plan for the stated general duty while separately checking potential additional duties and Chapter 99 reporting requirements, because the ruling expressly does not address those charges or applicable exceptions.
Shockwave Motion System Simulator from Canada: The Shockwave Motion System Simulator from Canada, a stationary audiovisual and physical-motion amusement attraction, is classified under HTSUS 9508.24.0000 as a motion simulator or moving theater, with a free general duty rate.
Why and what it means
Its platform, passenger seats, actuators, computer, screen, speakers and controls function as one integrated system, synchronizing seat movement with pre-programmed audiovisual content while passengers experience the ride without operational control.
Importers can plan around the free general duty rate, but the ruling does not determine additional duties or charges, and applicable Chapter 99 tariff or exception provisions may also require reporting.
Quorn Imitation Meat from the United Kingdom: Quorn Meatless Wings, Nuggets, White Burgers, and Schnitzel from the United Kingdom are classified under HTSUS 2106.90.9991 as frozen food preparations not elsewhere specified or included, with a general duty rate of 6.4 percent ad valorem.
Why and what it means
All four products use mycoprotein as their principal ingredient and are shipped frozen, placing the described meat-free preparations within the subheading for other frozen food preparations.
Importers must account for FDA Bioterrorism Act requirements and assess any applicable additional duties or Chapter 99 reporting, because the ruling establishes the general classification but does not determine additional charges.
Automotive Headlight Switch Assembly from Thailand: The KD-2002 automotive headlight switch assembly, which controls vehicle headlights and instrument illumination intensity, is a product of Thailand for country-of-origin and marking purposes when imported into the United States.
Why and what it means
Soldering individual electronic components onto the bare circuit board in Thailand substantially transforms them into a Thai-origin PCBA, which establishes the finished switch assembly’s function by opening and closing circuits and providing electrical control.
Importers should use Thailand as the origin for marking purposes under the described manufacturing facts; changes to those facts or nonconforming goods require notifying CBP and requesting a new ruling.
Skat Trak Paddle Tires Processed in Canada: Skat Trak paddle tires classify as new motorcycle tires under HTSUS 4011.40.0000, duty free; new ATV or UTV tires under 4011.90.8010, at 3.4 percent ad valorem; and used retreaded tires under 4012.19.8000, also at 3.4 percent ad valorem.
Why and what it means
Canadian retreading substantially transforms used United States racing slicks into Canadian-origin tires, but replacing unused factory treads with paddles is not retreading and does not substantially transform new tires originating in China, Thailand, or Taiwan.
Importers should distinguish new tires from used retreaded tires for classification and origin planning, retain the original country of origin for processed new tires, and separately assess potential Chapter 99 duties not addressed by this ruling.
Safer Transfer Board from China: The Safer Transfer Board from China is classified as household metal furniture under HTSUS 9403.20.0050, with a free general duty rate, and qualifies for secondary classification under the Nairobi Protocol in HTSUS 9817.00.96.
Why and what it means
The weight-supporting metal posts and mounting components impart the composite board’s essential character, while the supplied information satisfies CBP’s five factors for articles specially designed for permanently or chronically handicapped persons.
Properly claiming entry under HTSUS 9817.00.96, subject to CBP agreement, excludes additional duties imposed by 9903.05.31 and 9903.88.03, but the ruling does not resolve other potentially applicable duties, taxes, fees, or charges.
Desk and Organizer Mats from Portugal: The Madison desk mat and Chester organizer mat from Portugal fall under HTSUS 6307.90.9891 at 7 percent ad valorem, while the Rochelle leather desk mat falls under HTSUS 4205.00.8000, duty free.
Why and what it means
Madison and Chester lack a single material imparting essential character, making heading 6307 controlling under GRI 3(c), while Rochelle’s leather imparts essential character under GRI 3(b) through its primary visual impact and predominance in weight.
Importers should distinguish these models for base-duty planning and separately assess potential Chapter 99 reporting and additional charges, because the ruling establishes their classifications but does not address the applicability of additional duties, taxes, or fees.
U.S.-Origin Gold Ring Finished in India: The diamond-set gold ring is U.S.-origin and exempt from country-of-origin marking, classifiable under HTSUS 7113.19.50 at 5.5 percent ad valorem, and eligible for treatment under HTSUS 9802.00.5060 subject to documentation requirements.
Why and what it means
Casting in the United States gives the ring its essential character, while cleaning, diamond setting, polishing, packaging, and tagging in India do not substantially transform the casting and constitute acceptable foreign processing for Chapter 98 treatment.
To obtain duty assessment on only the value of foreign processing, importers must satisfy 19 CFR 10.8 with declarations from the processor and importer; the ruling does not address additional duties or other charges.
Linezolid Tablets in Dosage Form from India: Linezolid imported from India in 600 mg tablets is classified under HTSUS subheading 3004.90.9214, covering anti-infective medicaments containing linezolid or its salts, with a free general rate of duty.
Why and what it means
The tablets contain linezolid, an oxazolidinone antibacterial indicated for infections caused by susceptible Gram-positive bacteria, and their measured-dose therapeutic form falls within the provision for medicaments containing linezolid or its salts.
Importers should assess potential FDA requirements and Chapter 99 reporting obligations separately, because the free general duty rate does not resolve the applicability of additional tariffs, taxes, fees, or other charges.
Verkada Network Speakers from Thailand: Verkada Network Speakers from Thailand, models NS141, NS151, NS261, and NS631, are classified under HTSUS 8518.22.0000 as multiple loudspeakers mounted in the same enclosure, with a free general duty rate.
Why and what it means
Sound reproduction is the speakers’ principal function, while transceivers and networking components merely facilitate audio reproduction, making classification under heading 8517 inappropriate despite their network capabilities and, in some models, integrated Ethernet switches.
Importers should distinguish the free general duty rate from potential additional charges, because this ruling does not determine additional tariff applicability and the speakers may require Chapter 99 reporting for applicable tariffs or exceptions.
Outdoor Lamp Kits from China: For the Extensa E25 decorative cast-iron outdoor lamp kit from China, CBP accepted the retail-carton marking “DESIGNED IN THE NETHERLANDS / CRAFTED IN CHINA,” with no separate marking proposed for the enclosed kit.
Why and what it means
The permanent adhesive label displays both statements in the same font style and size on an unobstructed carton panel, and the tightly bound, reinforced carton remains intact until delivery to the ultimate U.S. purchaser.
Importers may rely on the described carton-label arrangement for marking compliance only while the merchandise and packaging conform to these facts; changes should be brought to CBP’s attention through a new ruling request.
Complete Strut Assembly from Thailand: The complete automotive strut assembly, Part Number S0143-A0011, combining a coil spring and shock absorber for specified Ford and Lincoln vehicles, has Thailand as its country of origin.
Why and what it means
No single component or set of components from one country imparted the character of the shock absorber or entire assembly, so CBP relied on final assembly in Thailand to determine origin.
Importers may rely on Thailand origin only for merchandise matching the described manufacturing facts, which CBP may verify; changes to those facts or nonconforming goods require notification and a new ruling request.
SmartKey Exterior Door Lockset from Taiwan: The Capetown Handleset featuring SmartKey, Model Number 98001-445, from Taiwan is classified under HTSUS 8301.40.6030 as a door lockset, with a general duty rate of 5.7 percent ad valorem.
Why and what it means
The primarily zinc components are imported together as a retail set, and the lock imparts essential character because the handleset includes a deadbolt and significant security features beyond traditional locksets.
Importers should plan for the stated general duty while separately assessing any additional duties and Chapter 99 reporting requirements, because the ruling expressly does not determine whether those additional charges apply.
No summarized ruling matches. Try a ruling number like H357904 or a product word.
Notable Compliance Patterns
Assembly abroad can go either way. The pencil tire gauge (N365613) and the pneumatic impact wrench (N365620) built in Malaysia from Chinese and Malaysian components are Malaysian goods, while the steam irons assembled in Vietnam from Chinese parts (N365270) remain Chinese. CBP is tracking where the component became the article, not how much assembly labour the last country supplied.
Finishing an already-made article rarely moves origin. German wrapping paper (N365363) survives printing, foil stamping, cutting and packaging in China with its origin intact, and US-made gold rings finished in India (N365032) stay American. N365207 is the mirror image: Chinese base paper printed and die-cut into branded labels in Peru becomes Peruvian, because the paper had not yet become the finished article.
Origin analysis is where the trade-remedy exposure is decided. HQ H357904 keeps Chinese-assembled laptop displays Korean, which keeps them outside China-specific Section 301 duties, and N365207 confirms both Section 301 and US-Peru agreement treatment for the Peruvian labels. N365630 shows the other direction: a US-assembled vehicle returns duty free under 9801.00.10.
One product family can split across subheadings. The Skat Trak paddle tyres (N365226) are motorcycle tyres under 4011.40.0000, duty free, or ATV/UTV tyres under 4011.90.8010 at 3.4 percent depending on the vehicle, and the air blowers (N365200) divide on motor type and wattage. The desk mats (N365337) and fleece jacket (N365526) show how quickly a rate moves with construction and fibre content.
What These Rulings Could Mean for Your Imports
Two rulings in this batch show how much the country of origin can change what an importer pays, and they point in opposite directions.
When "shipped from China" does not mean "Chinese".
Picture an importer buying laptop screens from a factory in China. Because the goods leave from China, it is natural to declare them as Chinese and pay the extra China-only Section 301 duties. HQ H357904 says that is not always right: when the most important part, the LCD cell, is made in South Korea and the Chinese factory only assembles the module around it, the screen is a Korean product. For that importer, getting the origin right could mean a lower duty bill on every shipment.
See ruling H357904When moving production does not move the origin.
The steam iron ruling (N365270) shows the opposite risk. An importer who shifted production of a small appliance from China to Vietnam to avoid China tariffs might assume the "Made in Vietnam" label settles the question. CBP decided the irons are still Chinese, because the key part, the soleplate, comes from China and the work in Vietnam is mostly simple assembly. Declaring Vietnam in a case like this means underpaid duties, and possible penalties if CBP reviews the entries later.
See ruling N365270Our recommendation: do not take the country on the shipping documents as the final answer. Before your next entry, find out where the most important part of your product is made and how much real manufacturing happens in the last country. If your product looks like one of these cases, ask your supplier for a breakdown of where each main component comes from, and consider asking CBP for your own binding ruling before you rely on a lower-duty origin.
Appendix: Other Rulings in This Batch
| Ruling Number | Date | Type | Subject |
|---|---|---|---|
| N365648 | October 9, 2026 | Classification | Robotic Shot Peening Machine from Canada |
| N365606 | October 9, 2026 | Country of Origin / Marking | Air Tool Filters of Malaysian Origin |
| N365605 | October 9, 2026 | Country of Origin / Marking | Pressure Gauge Origin Determined as Malaysia |
| N365564 | October 9, 2026 | Classification | AngleGenie Angle Measurement Device from China |
| N365454 | October 9, 2026 | Classification | Fresh Balsam Fir Wreaths from Canada |
| N365379 | October 9, 2026 | Classification | Ceramic Goose Decorations from China |
| N365375 | October 9, 2026 | Country of Origin | German Wrapping Paper Finished in China |
| N365374 | October 9, 2026 | Country of Origin | German Wrapping Paper Finished in China |
| N365371 | October 9, 2026 | Country of Origin | German Wrapping Paper Foil-Stamped in China |
| N365358 | October 9, 2026 | Classification | Men’s Polyester Knit Jacket from Bangladesh |
| N365349 | October 9, 2026 | Country of Origin / Marking | U.S. Origin of Helical Coil Springs |
| N365344 | October 9, 2026 | Country of Origin | Electric Stove Heaters from Thailand |
| N365257 | October 9, 2026 | Classification | Freeze-Dried Fishing Bait Worms from South Korea |
| N365188 | October 9, 2026 | Classification | Solar Panel Assembly Line from China |
| N365176 | October 9, 2026 | Classification | Bandaby Hamster Home from China |
| N365168 | October 9, 2026 | Classification | Gravity-Fed Roller Racks from China |
| N365585 | October 8, 2026 | Classification | Alert Guard Signaling Devices from China |
| N365426 | October 8, 2026 | Classification | Steel Wheel Lug Nut from Thailand |
| N365367 | October 8, 2026 | Country of Origin | German Wrapping Paper Finished in China |
| N365365 | October 8, 2026 | Country of Origin | German Wrapping Paper Decorated in China |
| N365364 | October 8, 2026 | Country of Origin | German Wrapping Paper Finished in China |
| N365345 | October 8, 2026 | Classification | Steel Swing Clear Hinges from China |
| N365326 | October 8, 2026 | Classification | Fiberglass Reinforced Resin Spacers from Canada |
| N365323 | October 8, 2026 | Classification | Canola Straw Bedding from Canada |
| N365271 | October 8, 2026 | Classification | Aluminum Hockey Locker Room Nameplates from Canada |
| N365098 | October 8, 2026 | Country of Origin / Marking | Steel Oil Country Tubular Goods from Cambodia |
| N365078 | October 8, 2026 | Classification | Gas Utility Bypass Valve Stem from China |
| N365060 | October 8, 2026 | Classification | Fresh Evergreen Wreaths from Canada |
| N365053 | October 8, 2026 | Classification | Plastic Impact Padding from Vietnam |
| N364966 | October 8, 2026 | Classification | Three Body Massage Oils from France |
| N364962 | October 8, 2026 | Classification | Ofa Karri Fragrance Mists from France |
| N365615 | October 7, 2026 | Country of Origin | Pneumatic Impact Wrench from Malaysia |
| N365175 | October 7, 2026 | Classification | Steel Hemispherical Heads from France |
| N365157 | October 7, 2026 | Classification | Beaded Sunglass Cords from China |
| N365567 | October 6, 2026 | Classification | Plastic Shopping Cart Parts from Canada |
| N365390 | October 6, 2026 | Classification | Stainless-Steel Truck Sun Visor from Canada |
| N365325 | October 6, 2026 | Classification | Paperboard Bottle Carriers from Vietnam |
| N365324 | October 6, 2026 | Classification | WR-90 Waveguide Circulator from China |
| N365239 | October 6, 2026 | Classification | Plasma Coating System from Switzerland |
| N365094 | October 6, 2026 | Country of Origin | Metal Lantern Wax Warmers from Vietnam |
| N365049 | October 6, 2026 | Classification | Women’s Leather Mule Sandals from Argentina |
| N365023 | October 6, 2026 | Classification | Ceramic Bunny Decorations from China |
| N364937 | October 6, 2026 | Classification | Dried Basil Seeds from India |
| N364886 | October 6, 2026 | Classification | High Ropes Course Systems from Germany |
| N365093 | October 5, 2026 | Country of Origin | Metal Chicken Windchimes from Vietnam |
| N365047 | October 5, 2026 | Classification / Country of Origin / Marking / Trade Program | Gold Diamond Ring Cast in United States |
| N365031 | October 5, 2026 | Classification / Country of Origin / Marking / Trade Program | U.S.-Origin Gold Earrings Finished in India |
| N364942 | October 5, 2026 | Classification | Diltiazem Hydrochloride Extended-Release Capsules from India |
| N364940 | October 5, 2026 | Classification | Norepinephrine Bitartrate Injection from Italy |
| N364882 | October 5, 2026 | Classification | Semiprecious Gemstone Pendant Set from Ecuador |
| N365392 | October 2, 2026 | Classification | Utilibond Cementitious Compound from Canada |
| N365145 | October 2, 2026 | Classification / Country of Origin / Marking / Trade Program | Personalized Plywood Tags from Canada |
| N364972 | October 2, 2026 | Classification | Women’s Solid Garden Clog from China |
| N364953 | October 2, 2026 | Classification | Orange Color Masterbatch from Austria |
| N364934 | October 2, 2026 | Classification | Modular Miniature Golf Game from China |
| N365204 | October 1, 2026 | Classification | Mounted Printed Photographs from Canada |
| N365112 | October 1, 2026 | Classification / Country of Origin | Electronic Air-Data Instruments from Germany |
| N365099 | October 1, 2026 | Classification | Electric Hot Tubs from the United Kingdom |
| N364974 | October 1, 2026 | Classification | Steel Forklift Bracket from the United Kingdom |
| N364968 | October 1, 2026 | Classification | Flexible Straw Bracelet from China |
| N364778 | October 1, 2026 | Country of Origin | Iron Decorative Windmill from Vietnam |
Method, Sources and Use
Method. Every letter was retrieved from its official CROSS record and summarized from the ruling itself, not from the subject line. New York rulings are numbered sequentially by issue, so the 84 New York letters were enumerated exhaustively across the current numbering range rather than sampled; the date column is the decision date printed on the ruling.
Selection. The 24 featured letters were chosen on importer impact – origin determinations involving processing in more than one country, set and functional-unit questions, and classifications where the duty outcome differs materially between provisions. The appendix carries the rest of the batch without summaries. Nothing in the batch was excluded from the report.
Sources and use. All records come from the Customs Rulings Online Search System at rulings.cbp.gov, with each ruling number linked to its official letter. This is a practical summary of public CBP material, not legal advice: rates, Chapter 99 measures and trade-remedy exposure change and depend on facts a ruling does not address, so verify the current HTSUS, the entry facts and the full letter before filing.